Contact
CALL KOLLSEA
24/7 consulting support
Consulting on products and pricing policies
Technical advice
Warranty support
DO YOU NEED ADVICE
Please leave your information and KOLLSEA will contact you
Kollsea Silicone Adhesive is proud to bring international quality products, creating perfect beauty for projects.
Frequently asked questions
Depending on the surface used, you can also use neutral glue. If the surface is acrylic, polyester or plastic, steel, neutral glue should be used
It is necessary to apply glue to the ventilation pipe to prevent leaks, pressure drops and dirty air from entering. Most ventilation pipes are made of galvanized steel or aluminum.
If the pipe is made of steel, it is necessary to use neutral glue to avoid corrosion.
In general, glue will have greater viscosity, i.e. thicker, as the temperature decreases. When the temperature is lower than 5°C, the glue will be more difficult to pump out of the tube. Low temperatures also cause glue to dry longer.
At high temperatures, on the contrary, the glue will become more liquid and dry faster. The optimal temperature for using glue is 10°C to 25°C.
Air humidity is a factor that affects 1-component silicone sealant. The effect of humidity is summarized as follows. If the humidity is high, the glue will dry faster.
The higher the humidity and temperature, the faster the glue dries.